Y-E DATA | Support | Internal 7 in 1 Drive 3 Driver Download

Download (Multimedia Products)

Home > Download (Multimedia Products)

Internal 7 in 1 Drive 3 (YD-8V07) Driver Download

Reproduction in whole or in part of this software and instruction manual, and the leasing of this software, without written permission of the licensor, are prohibited by the Copyright Law.
This software is for use only with the designated equipment.
The specification of this software is subject to change without notice for improvement.
No liability whatsoever is assumed for any damages of any kind, including without limitation damages for loss of business or profits, other pecuniary loss, or third party claims, resulting from the use of the software included with this product.
No liability whatsoever is assumed for any damages of any kind caused by misuse or by other equipment, or for trouble or damage incurred by unauthorized repair or alteration.
Products with defects caused during manufacturing will gladly be replaced. No liability whatsoever is assumed for defects due to other causes.

OEM models are shipped with their own customized drivers. Please use the driver that comes with your product, not the ones available on this page. If your drive was not sold under the Y-E Data name, please contact your PC maker or dealer for support.

Internal 7 in 1 Drive 3
Model
YD-8V07

Shipped with
Driver CD-ROM

About Memory Card Access LED
» Notice: Information page

Figure: The position of Memory Card Access LED
Memory Card Access LED (yellow LED) of Internal 7 in 1 Drive 3 is always lighting while the host PC is powered on.
However, the LED of some drives does not light but blinks only during accessing a Memory Card. Please refer this information.

Internal 7 in 1 Drive 3 Users Manual
(Needs Adobe Acrobat Reader 4.0 or later)

» Download: Internal_7in1_3.pdf ( 1,048,816 bytes )

Firmware Updater (Firmware Version 3.17)

Please be sure to read carefully Updater User's Manual before updating your firmware. Wrong operation may give fatal damage to your drive.

» Download Manual: 149395-02E.pdf ( 95,415 bytes )

» Download Updater: HMI317.zip ( 845,600 bytes )
Please be sure that your drive has the same faceplate as the image on the left. Wrong updater gives fatal damage to your drive.

System requirements
* Windows XP SP1 or greater
* Windows 2000 SP4
If you use USB 2.0 interface, the USB 2.0 driver provided by Microsoft is required.
* This software does not work on Windows Vista™.

Firmware Revision History
Ver 3.17: Enhancement of SD card and CF card support.

For Windows Vista™ x86/x64:
Icon utility software Ver 1.00

Internal 7 in 1 Drive 3 works with Windows Vista™ standard built-in Microsoft's drivers.
The following icon utility software changes the drive icon to the individual memory card icon so you can find the drive easily.

» Download: usbstvs100.zip ( 1,287,514 bytes )

For Windows XP SP1:
Driver Ver 1.10
Internal 7 in 1 dirve 3 works with Windows XP standard built-in Microsoft's drivers.
The following driver changes the icon to the individual memory card icon so you can find the drive easily.

» Download: USBSTXP110.zip ( 1,141,442 bytes )

return to top

For Windows XP:
Driver Ver 1.10
Internal 7 in 1 dirve 3 works with Windows XP standard built-in Microsoft's drivers.
The following driver changes the drive label so you can find the drive easily.

* To see individual memory card icons, please install
Windows XP SP1.

» Download: USBSTXP110.zip ( 1,141,442 bytes )

For Windows 2000 SP3, SP4:
Driver Ver 1.06
Internal 7 in 1 dirve 3 works with Windows 2000 SP3 or SP4
standard built-in Microsoft's drivers. The following driver changes
the icon to the individual memory card icon so you can find the
drive easily.

* Please install this driver after installing Windows 2000 SP3 or SP4.

» Download: USBST2KS106.zip ( 1,213,221 bytes )

For Windows 2000, Windows 2000 SP1 and Windows 2000 SP2:
Driver Ver 1.15
We recommend you to install Windows 2000 SP3 or later , and install corresponding dirver software.

» Download: USBST2K115.zip ( 1,139,827 bytes )

For Windows Me:
Driver Ver 1.18
Internal 7 in 1 dirve 3 works with Windows Me standard built-in Microsoft's drivers.
The following driver changes the icon to the individual memory card icon so you can find the drive easily.

» Download: USBSTMe118.zip ( 1,012,216 bytes )

For Windows 98 and Windows 98 SE:
Driver Ver 1.18

» Download: USBST98118.zip ( 1,026,564 bytes )