Internal 7 in 1
Internal 7 in 1
|Do not use the drivers on Y-E Data Web Pages for OEM (Original Equipment
Manufacturer Product) models.
OEM models are shipped with their own customized drivers. Please
use the driver that comes with your product, not the ones available
on this page. If your USB HMD was not sold under the Y-E Data name,
please contact your PC maker or dealer for support.
1. Custom Icons for the YD-8V03 are not displayed.
Check following items.
1-1. If you have installed custom icon driver for the card reader of other
brand, uninstall it if possible. Or, if the upgraded one is available,
try the upgrade.
1-2. Try following sequence to refresh the driver software if you have
installed other removable storage devices or you have used network drives.
(1) On the device manager program, double click 'Universal Serial Bus controller'
item to view the individual items. Next, double click 'USB Mass Storage
Device' item to open the property window, then disable the item using popup
menu placed on the bottom side of the window.
(2) Restart your PC.
(3) Enable the USB Mass Storage device again, on the device manager in
order to reinstall the device driver.
2. MemoryStick Pro card, 2GB SD card
YD-8V03 (Internal 7 in 1 Drive) does not support MemoryStick Pro card, and 2GB or above SD card.
We are sorry that we do not have a plan to update the firmware of this product.
3. Floppy Disk Drive (FDD) does not work.
3-1. First of all, make sure the drive icon of the floppy is displayed
in the My Computer window normally.
If the icon is not found,
make sure that the floppy related BIOS settings;
e.g. the type of the drive
is set to 3.5" 1.44M, the Floppy Disk controller is enabled, and so on.
Regarding the setting of the BIOS, refer to the manual of your PC, because the
setting items are depend on the PC.
3-2. If the LED of the FDD turns on constantly, probably the 34 pins interface
cable has been connected upside
down. Check the connecting direction.
Note that inserted floppy diskettes
may be damaged during the above condition,
even if the write-protection of
the diskettes are enabled. In the worst case, the motherboard may also be
3-3. If accessing the drive does not turn the LED of the FDD on, the power
cable or the interface cable may not be connected properly. Make sure the
connection. Note that wrong connection may break motherboard.
3-4. If you have another standard 3.5" 1.44M FDD, it is good idea
to replace to your own FDD instead of the YD-8V03 and to confirm that it
works fine in order to judge whether the YD-8V03 is broken or not.